Leica ST5010 Instructions for Use, V2.4, RevF

Size: px

Start display at page:

Download "Leica ST5010 Instructions for Use, V2.4, RevF"

横溃衷
7 years ago
Views:

1 Leica AutoStainerXL Leica AutoStainerXL, V / G

2 备案号 / 产品技术要求编号 : 国械备产品名称 : 染色机产品型号 :Leica Autostainer XL (ST5010) 备案人 / 生产企业名称 :Leica Biosystems Nussloch GmbH 住所 :Heidelberger Strasse Nussloch Germany 生产地址 :Heidelberger Strasse Nussloch Germany 备案人 / 生产企业联系电话 : 生产日期 : 见产品英文铭牌使用期限 : 无代理人及售后服务机构 : 徕卡显微系统 ( 上海 ) 贸易有限公司代理人及售后服务地址 : 中国 ( 上海 ) 自由贸易试验区富特北路 127 号 3 楼 C 部位联系电话 : 传真 : 说明书编制或修订日期

3 Leica Biosystems Nussloch GmbH () Leica Biosystems Nussloch GmbH Leica Biosystems Nussloch GmbH Leica Biosystems Nussloch GmbH Heidelberger Str D Nussloch Germany Leica AutoStainer XL 3

4 UPS () () V /2016

5 5.7 () () () Leica AutoStainer XL 5

6 (5) ( 5) Leica AutoStainer XL V /2016

7 1. 1 ROHS WEEE RoHS WEEE WEEE (ElektroG 7 ) CE CE EC Leica AutoStainer XL 7

8 AutoStainer XL AutoStainer XL - AutoStainer XL 8 V /2016

9 CE DIN EN 1717: ( ) Leica AutoStainer XL 9

10 3. AutoStainer XL AutoStainer XL 11 ( 30 ) AutoStainer XL AutoStainer XL 10 V /2016

11 3. Leica AutoStainer XL 11

12 b 18a V /2016

13 ON/STOP ( ) LED LED () 17. LED 18a. 18b ( ) 24. () (ON/OFF ( )) V 1 A Leica AutoStainer XL 13

14 Leica ST5010 ( V / Hz) 1 ( 2)... 1 ( ) /4 V ( ) () ( ) ( ) 14 V /2016

15 ( 600 ) ml C 65 C C 35 C % ( x x ) cm x 67 cm x 51 cm...81 kg V 120 V 50 Hz 60 Hz 230 V 240 V 50 Hz 60 Hz Leica AutoStainer XL 15

16 4. AutoStainer XL () 4.1 AutoStainer XL ( 1090 mm 670 mm ) 3 m AutoStainer XL 110 V 8 A 240 V 4 A AutoStainer XL ( 3 27) ( 3 34) ( 3 29) 16 V /2016

17 ON/STOP ( ) STOP ( ) 3. ON/OFF ( ) ON ( ) 4. ON/STOP ( ) ON ( ) 3 Main Menu ( ) ON/STOP ( ) STOP ( ) ON/OFF ( ) ON ( ) /4" Leica AutoStainer XL 17

18 UPS () (UPS) 4 UPS UPS 200 VA 5 UPS UPS UPS 4 18 V /2016

19 () ( UPS ) ON/STOP ( ) STOP ( ) ON ( ) UPS 1 A 50 V (6.25 mm) 4.5 ( ) ( 2 18b) 4.6 Leica AutoStainer XL 19

20 5. AutoStainer XL AutoStainer XL LED LOAD () LED EXIT () LCD LOAD () LED AutoStainer XL 11 ( ) V /2016

21 AutoStainer XL LOAD () UNLOAD () LED LCD LED LCD [F1] [F4] 4 4 LED LED UNLOAD () LED ( ) ( ) STAIN () LED () ALARM () LED () POWER () LED () (ON/OFF ( ) ON/STOP ( ) ON ( )) Leica AutoStainer XL 21

22 5. LOAD () EXIT () LOAD () EXIT () LED ON/STOP ( ) ON ( ) Main Menu ( ) 3 AutoStainer XL V2.00 Main Menu Stain Edit SetUp PC AutoStainer XL V2.00 PC Stain () Edit () SetUp () () PC 22 V /2016

23 INSERT (blank step) () DELETE (all steps) () BLANK (steps removed) ( ) STAIN SELECT PROGRAM LOAD EXIT UNLOAD PAUSE SELECT PROGRAM COPY EDIT VIEW STAIN ABORT RACK MAIN MENU SET STEP, STATION, TIME AND EXACT MORE NEXT (step) () ERASE (step) () QUIT MORE CHECK (compatibility) ( ) SAVE PROGRAM EDIT SET UP PC CONTROL PC OVEN DIPS (agitation) () 5 MAIN MENU Leica AutoStainer XL 23

24 AutoStainer XL () V /2016

25 Main Menu ( ) [F2] Edit () [F2] Edit () [F2] Next ( ) 5. 00: ( 27 ) Leica AutoStainer XL 25

26 ( ) 2. ( 25 4) 3. [F3] Erase () 4. ( 27 ) 1. ( ) 2. [F2] Edit () 3. () 4. [F1] More () 5. [F1] More () 6. [F1] Insert () 7. [F1] Yes ( ) ( 27 ) 26 V /2016

27 ( ) 2. [F2] Edit () 3. [F1] More () 4. [F1] More () 5. [F3] Blank () 6. [F1] Yes ( ) 7. ( 27 ) Edit Program () [F4] Quit () ( [F1]) ( [F2]) ( [F4]) 2. [F1] 3. [F2] 4. [F4] ( ) 2. [F2] Edit () 3. [F1] More () 4. [F1] More () 5. [F2] Delete () 6. [F1] Yes ( ) 7. ( ) Leica AutoStainer XL 27

28 ( ) 2. [F1] Copy () [F1] Copy () [F4] Cancel () 28 V /2016

29 ( ) 2. [F3] View () 3. [F4] ( ) ( ) 2. [F2] Edit () 3. [F1] More () 4. [F2] Check () [F2] Check () 7. [F4] Leica AutoStainer XL 29

30 5. 9. [F4] V /2016

31 AutoStainer XL ( 46 1) () () C ( ) 1. Main Menu ( ) [F3] SetUp () 2. [F1] Oven () 3. [F1] [F2] 4. [F4] SetUp () 5. [F4] Main Menu ( ) Leica AutoStainer XL 31

32 () () Main Menu ( ) [F3] SetUp () 2. [F2] Dips () 3. [F1] [F2] 4. [F4] SetUp () 5. [F4] Main Menu ( ) () ( ) 32 V /2016

33 5.8 () ( 1) 1. Main Menu ( ) [F3] SetUp () 2. [F3] Move () 3. [F1] Dip () [F2] Up () [F3] Down () [F4] SetUp () 7. [F4] Main Menu ( ) AutoStainer XL 29 Leica AutoStainer XL 33

34 ml ( 2 18a) AutoStainer XL 8 L/min 34 V /2016

35 AutoStainer XL 1. Main Menu ( ) [F1] Stain () Abort () [F1] Stain () 2. ([LOAD] () LED ) 3. [LOAD] () [LOAD] () LED Leica AutoStainer XL 35

36 [EXIT] () LED [EXIT] () LED [EXIT] () [UNLOAD] () LED 1. [F1] Unload () 2. ( ) 3. [F4] Cancel () 36 V /2016

37 5. 4. [F1] Unload () 5. [F1] Done () (SetUp ()) 1. Abort () [F4] Pause () Main Menu ( ) [F1] Stain () 4. [F4] Main Menu ( ) Main Menu ( ) (SetUp()) Main Menu ( ) [F1] Leica AutoStainer XL 37

38 Staining () [F4] Pause () 2. [F2] [F2] Abort () 5. [F1] Done () [F4] Cancel () Abort () 8. [F1] [F4] Main Menu ( ) 38 V /2016

39 % ( ) Leica AutoStainer XL 39

40 7. AutoStainer XL [F1] Quiet () [F2] Pause () 40 V /2016

41 Mains Power fail () Power Supply fail ( ) Make sure that the head is free of obstruction ( ) Head stalled ( ) Fume system blocked () Oven failure () Oven overheating () Remove obstruction and replace rack on hook ( ) UPS () Leica AutoStainer XL 41

42 Program (x) cannot be used for staining ( (x) ) Program (x) is not compatible with programs in use ( (x) ) Ensure a rack is in the Load drawer and close the drawer ( ) Ensure the Exit drawer is empty and close the drawer ( ) 0 () Station (x) and Station (y) are in reverse order ( (x) (y) ) The steps after Exit will be ignored (Exit () ) Program (x) is in use for staining and cannot be altered ( (x) ) Exit () Exit () 42 V /2016

43 SetUp lost. Default SetUp used. ( ) Battery backed RAM Failure! Service is required. ( RAM ) Caution: increasing Dips might extend some station times ( ) () Leica AutoStainer XL 43

44 8. Leica Biosystems Nussloch GmbH 44 V /2016

45 9. () 亲爱的客户 : 任何要退回 Leica Biosystems 或要现场维修的产品, 都必须按正确的方法进行清洗和消毒由于朊病毒的污染, 如 CJD BSE CWD 等不能消除, 因此, 接触过包含朊病毒的样品的设备不能退回 Leica Biosystems 进行维修只能由经过风险培训且佩戴个人防护装备的现场维修工程师根据相关机构的政策和处理步骤的指导现场维修污染了朊病毒的设备在完成相关消毒工作后, 必须将该证明书与仪器放在一起, 将其固定到装运箱外部或直接递交给维修工程师在公司或维修工程师收到合格的证明书之前, 不打开箱子, 也不会执行维修工作若公司认为退回的货物有危险, 会立即将其退还客户, 费用由客户承担注意 : 切片机的刀片必须装在盒子里必填信息 : 标有 * 的区域为必填项根据仪器是否受到污染, 请继续填写 A 部分或 B 部分铭牌信息型号 ( 参见铭牌 )* SN ( 参见铭牌 )* REF ( 参见铭牌 )* A B 是是否 1 如果符合, 请在方框 A 中打勾否则请根据要求或实际情况提供进一步的信息, 完成 B 中所有内容该设备未接触过非固定生物样品本设备内部或外部曾经接触过如下所述的危险物质 : 血液体液病理样品请在此提供更多详细信息 : 其它生物危险品有害健康的化学药品 / 物质其它危险品放射性物质是否 2 该设备已清洗并消毒 : 若选是, 请给出具体方法 : 请在此提供更多详细信息 : 若选否 **, 请说明理由 : 是否 3 ** 未获得 Leica Biosystems 的书面同意, 此类设备不可退回该设备已做好准备, 确保可以安全搬运 / 运输请尽可能使用原来的装运箱 / 盒 Leica AutoStainer XL 45

46 9. () 避免拒收的重要提示 : 在仪器打包或移送维修工程师之前请放入一份复件, 若送往徕卡的物品无适当的消毒文件, 其退回费用由客户承担如果您有任何其它问题, 请致电当地的徕卡机构徕卡内部使用 : 如适用, 请给出相应的作业号和 RAN-/RGA 号 : 作业单号 : BU 退还核准号 : SU 退还核准书 : 签名 / 日期 * 机构 * 姓名 * 职衔 * 部门 * 地址 * 电子邮箱 * 电话 * 传真 Leica Biosystems Nussloch GmbH Heidelberger Str Nussloch, Germany 电话 : ++49 (0) 传真 : ++49 (0) V /2016

47 10. 产品中有毒物质的名称及含量 Names and Contents of the Hazardous Substances 部件名称 Part Name 有害物质 Hazardous Substances AXL V/50-60Hz 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 Printed circuit boards 电子元器件 Electronic components 机械部件 Mechanical parts 电缆 Cables 本表格依据 SJ/T 的规定编制 This table is prepared in according with the provisions of SJ/T : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 规定的限量要求以下 Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T : 表示该有害物质至少在该部件的某一均值材料中的含量超出 GB/T 规定的限量要求 Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T Leica AutoStainer XL 47

48 10. 产品中有毒物质的名称及含量 Names and Contents of the Hazardous Substances 部件名称 Part Name 有害物质 Hazardous Substances AXL /50-60 TS 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 Printed circuit boards 电子元器件 Electronic components 机械部件 Mechanical parts 电缆 Cables 本表格依据 SJ/T 的规定编制 This table is prepared in according with the provisions of SJ/T : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 规定的限量要求以下 Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T : 表示该有害物质至少在该部件的某一均值材料中的含量超出 GB/T 规定的限量要求 Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T V /2016

49 ( ) ( 0 ) () ± 1 () 0 ( ) / C () / 1-20 / () () () Leica AutoStainer XL 49

50 (IRAM 2073 / IEC C19) (AS/NZS 3112 / IEC C19) (NBR / IEC C13) (GB 2099 / IEC C19) (AFSNIT107-2-D1 / IEC C19) (CEE7/7 / IEC C13) (BS 1363 / IEC C13) (SI 32 / IEC C19) (CEI / IEC C13) (SEV 1011 CH-Type J / IEC C13) (SABS164-1 / IEC C19) (NEMA 5-15 / IEC C13) Leica TS ( 30 ) Sakura ( ) V /2016

51 2 Medite Medite Shandon Microm ( ) ( ) m 3/4" m m m ( ) x 2 mm FKM ( ) x 1.78 mm FKM ( ) V 3/4" 40/22 H6 () Leica AutoStainer XL 51

52 3 1 H&E 2 Papanicoleau 1 10: : : % 3 4 2: % 4 5 2:00 70 % 5 6 1:00 1 1: :00 2 2: :00 3 3: :00 4 2:00 HCl :02 5 0: :00 6 2:00 Scott :00 7 4: :00 8 2:00 95 % 9 9 1:30 OG :00 95 % :30 95 % :30 EA : :00 95 % : : % : : % : : % : : () V /2016

53 3 1 H&E 5 Hx 1 10: : : % 3 4 2: % 4 5 2:00 70 % 5 6 1: : :00 1 5: :00 2 2:00 HCl :02 3 0: :00 4 3:00 Scott :00 5 3: :00 6 3: :00 95 % : % :00 7 2: % :00 8 2: % :00 9 2: Leica AutoStainer XL 53

54 LCD LED PC UPS () LCD IBM LCD x y z () 54 V /2016

55 1 () Leica AutoStainer XL 55

56 () () 25 x 75 x 1 mm 56 V /2016

58 Leica Biosystems Nussloch GmbH Heidelberger Strasse D Nussloch

Leica ST5010 Instructions for Use, V3.0, RevI

Leica ST5010 Instructions for Use, V3.0, RevI Leica Autostainer XL (ST5010) 14 0456 89102 - I 3.0 I - 10.2017 备案号 / 产品技术要求编号 : 国械备 20151320 产品名称 : 染色机产品型号 :Leica Autostainer XL (ST5010) 备案人 / 生产企业名称 :Leica Biosystems Nussloch GmbH 住所 :Heidelberger