IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock,

Size: px

Start display at page:

Download "IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock,"

埋甄
7 years ago
Views:

1 Espresso Maker 意式咖啡机 CN / READ BEFORE USE

2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 2. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices, and other working environments; farm houses; by clients in hotels, motels, and other residential type environments; bed and breakfasttype environments. 3. Do not touch hot surfaces. Use handles or knobs. Care must be taken, as burns can occur from touching hot parts or from spilled, hot liquid. 4. To protect against fire, electric shock, and injury to persons, do not immerse cord, plug, or espresso maker in water or other liquid. 5. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children with out supervision. 6. Close supervision is necessary when any appliance is used by or near children. 7. Unplug from outlet when the espresso maker is not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance. 8. Appliance must be operated on a flat surface away from the edge of counter to prevent accidental tipping. 9. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Call our toll-free customer service number for information on examination, repair, or adjustment. 10. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons. 11. Do not use outdoors. 12. Do not let cord hang over edge of table or counter or touch hot surfaces, including the stove. 13. Be certain filter holder is securely in place when brewing espresso. Scalding may occur if the filter holder is removed during the brewing cycle. 14. Do not place appliance on or near a hot gas or electric burner or in a heated oven. 15. To disconnect appliance, turn controls to OFF and then remove plug from wall outlet. 16. Warning: To reduce the risk of fire or electric shock, do not remove the top or bottom covers. No userserviceable parts are inside. Repair should be done by authorized service personnel only. 17. Do not use appliance for other than intended use. 18. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. save these instructions! OTHER CONSUMER SAFETY INFORMATION This product is intended for household use only. The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating 2 of the appliance. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. To avoid an electrical circuit overload, do not use another high-wattage appliance on the same circuit with your espresso maker.

3 Parts and Features Removable Water Reservoir Cup Storage/ Cup Warmer Espresso Filter Holder Espresso/Pod Filter Holder Ground Espresso/Pod Filter Holder Frothing Nozzle and Cover Filter Holder Locking Lever Removable Drip Tray Frothing Nozzle Wrench Measuring Scoop with Tamping Tool ON/OFF Button Amber ON Light STANDBY Knob Position BREW Knob Position Green Ready Light (for BREW and STEAM) STEAM Knob Position Control Knob 3

4 Before First Use (Priming the Pump) NOTICE: Wash all removable parts in warm, soapy water. No parts may be washed in a dishwasher. The water pump must be primed before first use to work properly. Operating without water in the reservoir can permanently damage the appliance. 1 Fill the removable water reservoir to the MAX fill line with cold water and replace securely on the back of unit. 2 Plug in the unit and press the ON/OFF button to turn unit on. The amber ON light will illuminate. 3 The ready light will glow green when the water is heated and unit is ready for use. Place an empty container under frothing nozzle in order to catch any drips of water from the steam nozzle. 4 Turn the control knob to the STEAM setting. Steam will begin to flow from the steam nozzle. 5 Allow steam to flow for about 2 minutes. NOTE: After the ready light initially glows green, the light may cycle on and off during operation. 6 Turn the control knob back to the STANDBY position. 4

5 Before First Use (cont.) 7 8 Place a container under brew head it should be wide enough to catch water from both spouts. Turn the control knob to BREW and dispense any remaining water from reservoir. Turn control knob back to the STANDBY position. 9 Press ON/OFF button to turn the unit off. The light next to the button will turn off. Unplug the unit. 10 Wash all parts again with warm, soapy water and dry thoroughly. WARNING! Shock Hazard. Do not immerse machine, cord, or plug in water or any other liquid. See Cleaning section on page 12 for full instructions. 5

6 How to Use NOTE: Ensure there are no grounds on the rim of the filter holder. This prevents a proper seal from forming and may damage the machine. 1 Fill the removable water reservoir with desired amount of cold water and replace securely on the back of unit. 2 Align raised dimple on the exterior of espresso/pod filter holder with cutout notch on inside of filter holder. Rotate espresso/pod filter holder 180º to secure in base. OR 3 Place ground espresso holder into filter holder. Add one tablespoon of ground espresso for each cup being made. Use shallow holder for 1 cup and deep holder for 2 cups. Press grounds firmly into holder with tamping tool and ensure no grounds remain on the rim. 3 Place pod into filter holder. When using an ESE (Easy Serving Espresso) pod, always use the shallower espresso/pod filter holder. Never put two pods in either filter holder at one time. 6

7 How to Use (cont.) 4 Holding handle securely, align locking tabs of filter holder with the brew head opening. Insert filter until it slides all the way to the back and cannot be pushed in any further. 5 Pull down on the lever handle to lock the filter holder into place. The lever will be locked when it is slightly below horizontal and cannot be pushed down any further. 6 Plug in and press the ON/OFF button to turn unit on. The amber ON light will illuminate. The ready light will glow green when the water is heated and unit is ready for use. 7 Place one or two cups under brew head spouts. If using one cup, use one wide enough to catch espresso from both spouts. 8 Turn the control knob to BREW to begin the flow of espresso. 9 As espresso dispenses, it will gradually look lighter in color. Allow espresso to drip from filter holder for seconds before removing cup(s). This will make about oz. of espresso if using two cups or 2 3 oz. if using one cup. 7

8 How to Use (cont.) 10 Turn control knob back to the STANDBY position. 11 Push ON/OFF button to OFF. Unplug unit from outlet. 12 Wait about 1 minute before unlocking the lever and removing filter holder. This will allow any water still flowing through the pump to finish. NOTES: Some water may continue to drip intermittently from brew head. This is normal and a result of product operation. This unit has a steam purge in the drip tray that will cycle if there is any water remaining in the heater. Some steam may escape under the drip tray this is normal. 8

9 How to Use (cont.) OR 13 To empty espresso grounds and/or an espresso pod from the filter holder, flip the plastic lever located on the handle of the filter holder and hold the lever open. CAUTION: The metal parts of the filter holder may be hot. 14 Keeping thumb on handle lever, dispose of espresso grounds and/or pod filter. 15 Ensure filter holder is cool. Align raised dimple on espresso/pod filter holder with cutout notch in filter holder base; then remove. 16 Clean filter holder and brew head after each use. See Cleaning instructions on page 12. DO NOT allow grounds to remain in filter holder; this can clog filter holder and cause unit to malfunction. 9

10 How to Steam and Froth Milk WARNING Burn Hazard. Vapor and water emitted from frothing nozzle are hot. 1 Ensure there is water in the removable water reservoir and move the frothing nozzle to the right of the unit. 2 Plug unit in; press ON/OFF button to begin heating water. The ready light will glow green when the water is heated and unit is ready for use. 3 Fill a metal or ceramic cup 1/3 full with cold milk. A stainless steel cup and skim milk are recommended. 4 Hold cup underneath frothing nozzle, leaving about 1/4 to 1/2 inch between the nozzle and the bottom of the cup. 10

11 How to Steam and Froth Milk (cont.) 5 Turn the control knob to STEAM. Steam will begin to flow from the nozzle. 6 TO STEAM: Milk is steamed when the cup becomes warm to the touch. TO FROTH: Making sure there is always milk covering the nozzle, move cup up and down until desired consistency is reached. Froth should be stiff and scoopable with a spoon. 7 Turn the control knob back to the STANDBY position; then remove cup from underneath frothing nozzle. NOTE: After each time steaming and to prevent clogging nozzle, hold a cup with water under nozzle and steam into the cup to clean. 8 Push ON/OFF button to OFF. Unplug unit from outlet. 11

12 Recipes Espresso Cappuccino Latte Iced espresso, cappuccino, or latte Mocha Brew one or two cups at a time following directions. Optional: Add sugar to taste. Mix 1/3 espresso, 1/3 steamed milk, and 1/3 frothed milk. Top with ground nutmeg, ground cinnamon, powdered chocolate, or vanilla to taste. Mix 1/2 espresso with 1/2 steamed milk. Top with ground nutmeg, ground cinnamon, powdered chocolate, or vanilla to taste. Mix beverage as described above; then pour over ice. Mix 1 ounce thick chocolate syrup with 1/3 espresso. Fill with frothed or steamed milk. Cleaning WARNING Electric Shock Hazard. Disconnect power before wiping exterior of unit or brew head. Do not immerse cord, plug, or base in any liquid. 1 Make sure unit is turned on and the green ready light illuminated. Turn control knob to STEAM position and let steam flow for about 30 seconds into a cup; then turn control knob back to the STANDBY position. 2 Place a container under brew head wide enough to catch water from both spouts. Turn control knob to BREW and dispense at least one cup of water. 12

13 Cleaning (cont.) 3 Turn control knob back to STANDBY position; then press ON/OFF button to turn unit off. Unplug the unit. 4 Allow unit to cool completely; then remove cover of frothing nozzle and wipe down nozzle with a cloth. Every other use: Remove nozzle tip with wrench on tamping tool and wash in warm, soapy water. 5 Wipe exterior and brew head with warm water and damp cloth carefully. 6 Wash all parts with warm, soapy water and dry thoroughly. DO NOT wash any parts in a dishwasher. 13

14 Tips for Making Espresso For best results, use fresh-ground, dark, espresso roast coffee. If espresso preground coffee is used, store the unused portion in an airtight container and keep in a cool, dark area for up to one week. The grind of the coffee will affect the taste of the coffee and how the appliance works. If the grind is too coarse, water will flow too fast through the coffee and result in a weaker flavor. If the grind is too fine, the flavor may be too strong or bitter, and the grounds may clog the filter. For hotter espresso, preheat the filter holder, the ground espresso filter, and the pod filter by first brewing water into the cups for a few seconds and then emptying the brewed water. CAUTION: The filter holder, ground espresso filter, and pod filter are hot. Espresso beans may be ground in a coffee grinder. For best results, use the Melitta Coffee Grinder on the fine setting. If grinding espresso in a store or using a burr mill, then use a setting that is one to two notches coarser than the espresso setting. Grind your espresso so that it looks gritty, like salt or sand. It is too fine if it looks like powder and feels like flour. If the coffee is ground too fine, then the water will not flow through the coffee. Espresso pods make it even easier to brew a great cup of espresso and cleanup is as easy as throwing out the used pod. Pods can be purchased at many local coffee houses and specialty housewares stores. A Web search for coffee pods will also connect you with many coffee pod suppliers. Always use cold water to make coffee. Warm water or other liquids could cause damage to the appliance. Filtered water will make the best-tasting coffee. 14

15 Troubleshooting Espresso will not flow out. Is the water reservoir empty? Is the water reservoir properly fitted into position? Make sure that the coffee grounds are not overpacked in the filter. Is filter holder properly fitted into the espresso maker? Clean the filter, filter holder, and brew head. Holes in filter holder may be clogged. Clear with a toothpick or straightened paper clip. Machine is noisy when operating. Is the water reservoir empty? Is the water reservoir properly fitted into position? Is the filter holder properly fitted into position? Espresso is too weak. Always use fresh espresso ground coffee and tamp the ground coffee down firmly. The longer the brew time, the weaker the espresso (1 serving = 1 to 1-1/2 ounces). Be sure there is sufficient ground coffee in the filter. Coffee grounds are too coarse. Try a different brand or roast of coffee. Espresso is too strong or bitter. Too much ground espresso was used. Grounds were too fine. Brew longer before turning control knob back to STANDBY. Use the Melitta Coffee Grinder. Difficult to froth milk. Always use fresh, cold milk (skim milk is recommended). Use a cold, stainless steel cup and move the cup slightly up and down while frothing. Clean the frothing nozzle. Trying to froth too much milk; reduce amount of milk in cup. 15

16 OFF

17 部件和功能 / / / ON/OFF / ON ( ) 17

18 初次使用前 ( 启动泵 ) 1 2 ON/OFF / ON

19 初次使用前 ( 续 ) 7 8 BREW 9 ON/OFF /

20 使用方法 ESE 20

21 使用方法 ( 续 ) ON/OFF / ON 7 8 BREW

22 使用方法 ( 续 ) ON/OFF /

23 使用方法 ( 续 ) /

24 如何热牛奶和打奶泡 1 2 ON/OFF / 3 1/3 4 1/4 1/2 24

25 如何热牛奶和打奶泡 ( 续 ) ON/OFF / 25

26 食谱 Espresso Cappuccino Latte 1/3 1/3 1/3 Mocha 1 1/3 清洗 BREW 1 26

27 清洗 ( 续 ) 3 ON/ OFF /

28 冲泡意式咖啡小贴士 Hamilton Beach

29 故障排除 1 = Hamilton Beach 29

30 Model/ : CN Type/ EM03 Rating/ 220V~ 50Hz 1350W Dist.: Hamilton Beach Brands, Inc., Glen Allen, VA Hamilton Beach Brands, Inc

Hamilton Beach 6 Quart programmable Slow Cooker (C33567) Use and Care

Hamilton Beach 6 Quart programmable Slow Cooker (C33567) Use and Care READ BEFORE USE Visit www.hamiltonbeach.cn for our complete line of products and Use and Care Guides as well as delicious recipes, tips, and to register your product online! www.hamiltonbeach.cn. Questions?