产品样本

Size: px

Start display at page:

Download "产品样本"

贤排满
4 years ago
Views:

1 核电站用 E 级 K 类低烟无卤阻燃型控制电缆标准本产品按照 Q/0400DR0(R-E IEEE IEEE8) 标准制造适用范围本产品适用于核电站核岛反应堆厂房外部控制系统中网络的控制和信号连接该产品通过科技成果部级鉴定, 达到国际先进水平基本型号及名称型号 S S S S S SS/A-K S SS/A-K 表名称核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘镀锡铜丝编织总屏蔽聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘铜塑复合带绕包总屏蔽聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘铝塑复合带绕包总屏蔽聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘聚烯烃内衬层钢带铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘镀锡铜丝编织总屏蔽聚烯烃内衬层钢带铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘铜塑复合带绕包总屏蔽聚烯烃内衬层钢带铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘铝塑复合带绕包总屏蔽聚烯烃内衬层钢带铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘聚烯烃内衬层钢丝铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘镀锡铜丝编织总屏蔽聚烯烃内衬层钢丝铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘铜塑复合带绕包总屏蔽聚烯烃内衬层钢丝铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆核电站用 E 级 K 类, 镀锡铜导体交联聚烯烃双层绝缘铝塑复合带绕包总屏蔽聚烯烃内衬层钢丝铠装聚烯烃护套低烟无卤阻燃 (A 类 ) 型控制电缆备注 : 基本型号中字母代号见表型号中各代号表示说明随着基本型号中字母的变换, 电缆的名称也相应改变, 见表示方法举例

2 型号说明 ( ) 型号中各代号表示说明项目代号说明系列 HK 核电站用低烟无卤阻燃型控制电缆导体绝缘总屏蔽 ( 省略 ) 镀锡铜导体 T 裸铜导体 J 交联聚乙烯绝缘交联聚烯烃绝缘 J J 交联聚烯烃双层绝缘 ( 省略 ) 无屏蔽铜丝编织屏蔽镀锡铜丝编织屏蔽铜塑复合带绕包屏蔽铝塑复合带绕包屏蔽内衬层 S 聚烯烃钢带铠装铠装钢丝铠装 S 聚烯烃护套 G 交联聚烯烃 A 成束 A 类阻燃阻燃等级 B 成束 B 类阻燃成束类阻燃无卤特性低烟无卤核质量等级 K E 级 K 类 A B R GB/T 956(IE 608) 中第类单根导体 GB/T 956(IE 608) 中第类绞合导体 GB/T 956(IE 608) 中第软导体标称截面积 (mm ) 芯数核质量等级无卤特性阻燃等级外护套铠装内衬层总屏蔽芯数标称截面积 (mm ), 其中 : ) 优选芯数为 :,,4,5,6,7,8,9,0,,4,6,8,9,4,7,0,,7 ) 标称截面 mm : ) 另可根据顾客的要求, 选择不同的备注 : 根据上述所列的型号说明, 可以选择各种组合以满足需要绝缘导体系列表

3 表示方法举例核电站用 E 级 K 类低烟无卤阻燃型控制电缆由产品型号表示, 举例如下 :. 核电站用 E 级 K 类, 类绞合镀锡铜导体, 交联聚烯烃双层绝缘, 镀锡铜丝编织总屏蔽, 聚烯烃护套, 低烟无卤阻燃 (A 类 ) 型控制电缆,7 芯, 标称截面.5mm, 表示为 : 7.5 mm (B). 核电站用 E 级 K 类, 类单根镀锡铜导体, 交联聚乙烯绝缘, 铝塑复合带绕包总屏蔽, 聚烯烃内衬层, 钢带铠装, 聚烯烃护套, 低烟无卤阻燃 (B 类 ) 型控制电缆, 芯, 标称截面.5mm, 表示为 : SS/B-K.5 mm (A). 核电站用 E 级 K 类,镀锡铜软导体, 交联聚烯烃绝缘, 铜塑复合带绕包总屏蔽, 聚烯烃护套, 低烟无卤阻燃 ( 类 ) 型控制电缆,5 芯, 标称截面.0mm, 表示为 : 产品特性 S/-K 5.0 mm (R) 电缆额定电压 :600/000V 电缆导体的长期允许工作温度 :90 电缆的敷设推荐允许弯曲半径 : 非铠装电缆, 应不小于电缆外径的 8 倍 ; 铠装电缆, 应不小于电缆外径的 6 倍 4 电缆的最低使用环境温度 :-5 5 电缆的最低敷设温度 :0 低于最低敷设温度时应预先加热 6 电缆的正常使用寿命 :40 年 7 电缆的燃烧特性 7. 电缆应能通过 GB/T 880.( IE 60-) 规定的成束燃烧试验 7. 对交联聚烯烃绝缘的电缆, 绝缘线芯应能通过 GB/T 880. (IE60-) 规定的单根垂直燃烧试验 8 电缆应能符合 GB/T 765(IE 604) 规定的烟浓度试验要求 9 电缆的绝缘料和护套料按 GB/T 7650(IE 60754) 标准规定进行测试,pH 值不小于 4., 导电率应低于 0µs/mm 0 电缆的电气性能 0. 电缆应能经受 A 500V/5min 电压试验, 不击穿 0. 电缆的导体直流电阻见表 0. 电缆的绝缘电阻见表 4 表 Table 导体截面积 0 时导体直流电阻 D resistance of conductor at 0 裸铜 Bare opper Ω/km 镀锡铜 Tinned opper Ω/km mm 类 lass 类 lass lass 5 类 lass 类 lass lass 备注 : 为 GB/T 956(IE 608) 中的第类第类第导体 Note:The conductor construction may be the class, class or class 5 of GB/T 956 ( IE 608).

4 导体截面积 mm 交联聚烯烃双层绝缘 ross-linkedpolyolefin double layer insulated 类 lass 类 lass 0 时绝缘电阻 Insulation Resistance at 0 MΩ km lass 5 类 lass 交联聚乙烯绝缘 XLPE insulated 类 lass lass 5 表 4 Table 4 交联聚烯烃绝缘 ross-linked polyolefin insulated 类 lass 类 lass lass 电缆结构尺寸电缆的结构尺寸参见表 5 4

5 Standard lass E ategory K, Low-smoke, Halogen-free and Flame-retardant ontrol ables for Nuclear Power Plant It is manufactured according to Q/0400DR0(R-E IEEE IEEE8) standard. Application It is suitable for linking between signals and controlling in the control system network out of the building of nuclear island in nuclear power plant. It appraised the technological achievement, which was organized by the hina National Nuclear orporation(nn). It is confirmed an advanced level in international. Basic types and descriptions Type S S S S S S S S Table Description Tinned copper conductor, ross-linked polyolefin double layer insulated, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, tinned copper braided common shield, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, u/plastic tape wrapped common shield, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, Al/plastic tape wrapped common shield, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, polyolefin bedding, steel tape armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, tinned copper braided common shield, polyolefin bedding, steel tape armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, u/plastic tape wrapped common shield, polyolefin bedding, steel tape armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, Al/plastic tape wrapped common shield, polyolefin bedding, steel tape armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, polyolefin bedding, steel wire armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, tinned copper braided common shield, polyolefin bedding, steel wire armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, ross-linked polyolefin double layer insulated, u/plastic tape wrapped common shield, polyolefin bedding, steel wire armored, polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Tinned copper conductor, XLPE and polyolefin double layer insulated, Al/plastic tape wrapped common shield, thermoplastic polyolefin bedding, steel wire armored, thermoplastic polyolefin sheathed, low-smoke, halogen-free and flame-retardant ( category A) control cable of lass E category K Note: The symbols of basic types are shown in table explanation of the symbols in the type. While switch the symbol of basic types, the descriptions of cable should be changed according to the indication example in detail. 5

6 Indication / - () lass of conductor Nominal sectional area(mm ) Number of cores Nuclear quality grade Halogen free property Flame retardant grade Sheath Armour Bedding ommon shield Insulation onductor Series Explanation of the symbols in the type Item Symbol Explanation Series HK Low smoke and flame retardant control cable (omitted Tinned copper conductor onductor ) T Bare copper conductor J XLPE insulation Insulation J cross-linked polyolefin insulation cross-linked polyolefin double layer insulation ommon shield J (omitted ) No shield opper braided shield Tinned copper braided shield u/plastic tape wrapped shield Al/plastic tape wrapped shield Bedding S Polyolefin Steel tape armoured Armour Steel wire armoured S Polyolefin Sheath G cross-linked polyolefin A ategory A bunched flame-retardant Flame retardant grade B ategory B bunched flame-retardant ategory bunched flame-retardant Halogen free property Low-smoke, halogen-free Table Nuclear quality grade K lass E category K A lass single conductor, GB/T 956(IE 608) lass of conductor B lass stranded conductor, GB/T 956(IE 608) R lass 5 flexible conductor, GB/T 956(IE 608) cores normal area(mm ),thereinto: ) Preferred core:,,4,5,6,7,8,9,0,,4,6,8,9,4,7,0,,7; ) Normal area(mm ):0.5,0.5,0.75,.0,.5,.5,4,6,0; ) It may select different size according to the requirement of customer. Note: it may select all kinds of combination to meet with the requirement according to the explanation above. Indication example 6

7 The indication of low smoke, halogen-free and flame-retardant control cable of lass E category K consists of type and size. For example:. lass stranded tinned copper conductor, cross-linked polyolefin double layer insulated, tinned copper braided common shield, polyolefin sheath, low-smoke, halogen-free and flame-retardant (category A) control cable of lass E category K for nuclear power plant, 7 cores, normal sectional area is.5mm, which is indicated as follows: 7.5 mm (B). lass single tinned copper conductor, XLPE insulated, Al/plastic tape wrapped common shield, polyolefin bedding, steel tape armoured, polyolefin sheath, low-smoke, halogen-free and flame-retardant (category B) control cable of lass E category K, cores, normal sectional area is.5mm, which is indicated as follows: SS/B-K.5 mm (A). lass 5 tinned copper flexible conductor, cross-linked polyolefin insulated, u/plastic tape wrapped common shield, polyolefin sheath, low-smoke, halogen-free and flame-retardant (category ) control cable of lass E category K for nuclear power plant, 5 cores, normal sectional area is.0mm, which is indicated as follows: Properties S/-K 5.0 mm (R) Rated voltage:600/000v. The permitted long-term working temperature of conductor: 90. The permitted bending radius of cable: No less than 8 times of the overall diameter of the cable for which is non-armoured; No less than 6 times of the overall diameter of the cable for which is Armoured. 4 The Min. environmental temperature:-5. 5 Min. laying temperature of the cable is 0. The cable should be pre-heated if it is below the Min. laying temperature 6 Normally service life:40 years. 7 ombustibility 7. The cable can pass the test according to GB/T 880.( IE 60-). 7. For cross-linked polyolefin insulated cable, the insulated core can pass the test according to GB/T 880. (IE60-). 8 The cable can pass the test according to GB/T 765(IE 604). 9 Insulation and sheath material of the cable should be tested according to GB/T 7650(IE 60754), which ph is no less than 4., and conductivity should be less than 0µs/mm. 0 Electrical properties: 0. It can withstand A 500V/5min high voltage test. 0. D resistance of conductor is shown in the table. 0. Insulation resistance is shown in the table 4. onstruction of the cable It is referred to table 5. 7

8 mm class of conduct or S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K 表 5 Table 5 SS/A-K SS/A-K SS/A-K 类 class 类 class 类 class

9 mm class of conducto r S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K 续表 5 Table 5(continued) SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K 类 class 类 class 类 class 类 class

10 mm class of conductor S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K 续表 5 Table 5(continued) SS/A-K SS/A-K SS/A-K 类 class 类 class 类 class 类 class

11 mm class of conductor S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K 续表 5 Table 5(continued) SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K 类 class 类 class 类 class 类 class

12 续表 5 Table 5(continued) S/A-K SS/A-K SS/A-K SS/A-K mm class of S/A-K S/A-K SS/A-K SS/A-K SS/A-K conductor S/A-K SS/A-K SS/A-K 类 class 类 class 类 class 类 class

13 mm class of conductor S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K 续表 5 Table 5(continued) SS/A-K SS/A-K SS/A-K 类 class 类 class 类 class class class

14 mm class of conductor S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K 续表 5 Table 5(continued) SS/A-K SS/A-K SS/A-K class class class 续表 5 Table 5(continued) 4

15 mm class of conduct or S/A-K S/A-K S/A-K S/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K SS/A-K class class class

(Microsoft Word ULµçÀÂ.doc)

(Microsoft Word ULµçÀÂ.doc) UL Certified Cables 1 PV 电缆 (UL 证书号 :E338891) Solar photovoltaic cable (UL Certificate No. E338891S) 典型结构图 Typical structure diagram 导体 conductor 双层绝缘 Conductor Double layer insulation 护套 Sheath 序号型号