Microsoft Word - Panasonic Vierapad Quick Reference Guide Rev1.6.doc

Size: px

Start display at page:

Download "Microsoft Word - Panasonic Vierapad Quick Reference Guide Rev1.6.doc"

钝棉卜
5 years ago
Views:

1 Panasonic Remote Control Quick Reference Guide Model:

Setup 1. Insert 2 AAA battery (Heavy duty is supplied with remote or Alkaline, not lithium battery) CONTROLLING YOUR TV 1. Press Power key to turn on the TV 2. Set TV for pairing mode via menu 3.

2 Setup 1. Insert 2 AAA battery (Heavy duty is supplied with remote or Alkaline, not lithium battery) CONTROLLING YOUR TV 1. Press Power key to turn on the TV 2. Set TV for pairing mode via menu 3. Press and hold <Home> and <Option> key on the remote to pairing remote with TV Touchpad 1. Allow 360 degrees control for menu navigation Caution Please read these safety instructions to ensure our personal safety and prevent property damage Warning Do not put remote in a fire Do not disassemble the remote control Disposal of the remote control Important Safety Instruction 1. Read these instruction 2. Keep these instruction 3. Head all warning 4. Follow all instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth 7. Do not install near any jeat source such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 8. Only use attachment/accessories specified by manufacture 9. Refer all servicing to qualified service personnel. Service is required when apparatus has been damaged in ant way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped. Specification Operating Temperature: 0 degree 40 degree Battery Type: 2 AAA battery

3 COMPLIANCE WITH FCC RULES AND REGULATIONS You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user s authority to operate the equipment (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This Class B digital apparatus complies with Canadian ICES 003 This device complies with Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co located or operating in conjunction with any other antenna or transmitter

4 Conformément à la réglementation d'industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Cet appareil numérique de classe B est conforme à la norme NMB 003. Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son antenne ne doivent pas être co localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.

5 安裝 / 移除電池 VIERA 觸控板控制器本觸控板控制器設計用於方便操作, 尤其是 VIERA Connect 或網際網路內容的操作可以用此控制器直觀地操作電視通過用藍牙無線技術將觸控板控制器註冊到本電視便可以進行使用初次使用電視時, 會在自動搜尋 " 中出現註冊用設定畫面進行註冊後, 無需將此控制器對準電視就可以操作電視 ( 待機開啟 / 關閉開關除外 ) 若想使用待機開啟 / 關閉開關, 由於該開關由紅外線控制, 請將控制器直接對準電視的遙控訊號接收器 ( 無需註冊就可以操作該開關 ) 1 待機開啟 / 關閉開關與遙控器按鍵 1 功能相同 2 確定 3 觸控板 ( 參見以下 ) 4 跳出 5 VIERA 工具 / 螢幕顯示遙控螢幕顯示遙控 : 按下並按住可顯示遙控 GUI( 圖形用戶界面 ) 再次按下可移動圖形用戶界面的位置 ( 若想改變圖形用戶界面的頁面, 在觸控板上向左 / 右滑動手指 ) 6 音量調高 / 降低 7 [ 副目錄設定 ] 8 返回 9 選台調上 / 調下 10 網際網路 ([VIERA Connect])

* The drawing is for reference only 將 VIERA 觸控板控制器註冊到本電視 (Bluetooth Setup Instruction) 1. 將電視連接電源插座, 並開啟電源需要數秒時間才能顯示若電視上顯示紅色指示燈, 請按下遙控器上的待機開啟 / 關閉開 2. 選擇語言 3. 選擇 [ 配對 ] 依照螢幕上的指示說明使用觸控板控制器 ( 隨附 ) 4.

6 * The drawing is for reference only 將 VIERA 觸控板控制器註冊到本電視 (Bluetooth Setup Instruction) 1. 將電視連接電源插座, 並開啟電源需要數秒時間才能顯示若電視上顯示紅色指示燈, 請按下遙控器上的待機開啟 / 關閉開 2. 選擇語言 3. 選擇 [ 配對 ] 依照螢幕上的指示說明使用觸控板控制器 ( 隨附 ) 4. 按下並按住可首頁 +Option 安全注意事項根據 NCC 低功率電波輻射性電機管理辦法規定 : 第十二條經型式認證合格之低功率射頻電機, 非經許可, 公司商號或使用者均不得擅自變更頻率加大功率或變更原設計之特性及功能第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信 ; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用前項合法通信, 指依電信法規定作業之無線電通信

7 低功率射頻電機須忍受合法通信或工業科學及醫療用電波輻射性電機設備之干擾

Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

8 <Spanish> La operación de este equipo está sujeta a las siguientes dos condiciones 1. Es posible que este equipo o dispositivo no cause interferencia perjudicial y 2. Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. ("The operation of this equipment is subject to the following two conditions" a. This computer or device does not cause harmful interference b. This device must accept any interference, including interference that may cause an undesired effect.)

9 <Portuguese>

10 Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.

低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機, 非經許可, 公司商號或使用者均不得擅自變更頻率加大功率或變更原設計之特性及功能第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通訊 ; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用前項合法通訊,

低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機, 非經許可, 公司商號或使用者均不得擅自變更頻率加大功率或變更原設計之特性及功能第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通訊 ; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用前項合法通訊, 使用說明書 TMAX 機車在騎乘機車之前, 請務必仔細閱讀這本使用說明書 XP00 XP00A PW--T 低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機, 非經許可, 公司商號或使用者均不得擅自變更頻率加大功率或變更原設計之特性及功能第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通訊 ; 經發現有干擾現象時, 應立即停用, 並改善至無干擾時方得繼續使用前項合法通訊,